sudo sh metax-driver-3.8.0.10-deb-x86_64.run
[sudo] password for cast503:
Verifying archive integrity... 100% MD5 checksums are OK. All good.
Uncompressing MetaX driver installer 100%
uninstalling metax-linux-dkms
(Reading database ... 142019 files and directories currently installed.)
Removing metax-linux-dkms (3.8.30) ...
Module metax-linux-3.8.30 for kernel 6.8.0-110-generic (x86_64).
Before uninstall, this module version was ACTIVE on this kernel.
metax.ko.zst:
- Uninstallation
- Deleting from: /lib/modules/6.8.0-110-generic/updates/dkms/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
Running the post_remove script:
depmod....
Module metax-linux-3.8.30 for kernel 6.8.0-124-generic (x86_64).
Before uninstall, this module version was ACTIVE on this kernel.
metax.ko.zst:
- Uninstallation
- Deleting from: /lib/modules/6.8.0-124-generic/updates/dkms/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
Running the post_remove script:
depmod....
Deleting module metax-linux-3.8.30 completely from the DKMS tree.
uninstalling mxsmt
(Reading database ... 141807 files and directories currently installed.)
Removing mxsmt (3.7.2.30) ...
mxsmt package uninstalled successfully
Purging configuration files for mxsmt (3.7.2.30) ...
mxsmt package uninstalled successfully
dpkg: warning: while removing mxsmt, directory '/opt/mxdriver' not empty so not removed
uninstalling mxfw
(Reading database ... 141795 files and directories currently installed.)
Removing mxfw (3.7.2) ...
mxfw package uninstalled successfully
Purging configuration files for mxfw (3.7.2) ...
mxfw package uninstalled successfully
deb/mxfw_*.deb
deb/mxsmt_*.deb
deb/metax-linux[-_]*.deb
installing packages under /opt/mxdriver
installing deb/mxfw_3.8.0-1.all.deb
Selecting previously unselected package mxfw.
(Reading database ... 141709 files and directories currently installed.)
Preparing to unpack deb/mxfw_3.8.0-1.all.deb ...
Unpacking mxfw (3.8.0) ...
Setting up mxfw (3.8.0) ...
mxfw package installed successfully
installing deb/mxsmt_3.8.0.10.amd64.deb
Selecting previously unselected package mxsmt.
(Reading database ... 141795 files and directories currently installed.)
Preparing to unpack deb/mxsmt_3.8.0.10.amd64.deb ...
Unpacking mxsmt (3.8.0.10) ...
Setting up mxsmt (3.8.0.10) ...
mxsmt package installed successfully
Processing triggers for libc-bin (2.39-0ubuntu8.7) ...
installing deb/metax-linux_3.9.10-1_amd64.deb
Selecting previously unselected package metax-linux.
(Reading database ... 141807 files and directories currently installed.)
Preparing to unpack .../metax-linux_3.9.10-1_amd64.deb ...
Unpacking metax-linux (3.9.10) ...
Setting up metax-linux (3.9.10) ...
Notice: The current kernel version (6.8.0-124-generic) is not supported.
Please upgrade your kernel to one of the following versions:
5.10.0-0.deb10.28-amd64
5.10.0-29-amd64
5.10.0-30-amd64
5.10.200-4-velinux1u1-amd64
5.15.0-100-generic
5.15.0-105-generic
5.15.0-112-generic
5.15.0-119-generic
5.15.0-124-generic
5.15.0-130-generic
5.15.0-138-generic
5.15.0-25-generic
5.15.0-46-generic
5.15.0-58-generic
5.15.0-60-generic
5.15.0-72-generic
5.15.0-78-generic
5.15.0-88-generic
5.15.119-rt65-home-ear1.1
5.19.0-46-generic
5.19.17
5.4.0-131-generic
5.4.0-144-generic
5.4.0-148-generic
5.4.0-176-generic
5.4.0-26-generic
5.4.0-42-generic
5.4.18-142-generic
6.1.141-1-generic
6.1.152-1-generic
6.12.34-1-generic
6.12.47-1-generic
6.14.0-1003-oem
6.14.0-27-generic
6.8.0-31-generic
6.8.0-49-generic
6.8.0-53-generic
And then reinstall the metax-linux package.
dpkg: error processing package metax-linux (--install):
installed metax-linux package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
metax-linux
uninstalling metax-linux
(Reading database ... 141924 files and directories currently installed.)
Removing metax-linux (3.9.10) ...
metax-linux package uninstalled successfully
Purging configuration files for metax-linux (3.9.10) ...
metax-linux package uninstalled successfully
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
dkms is already the newest version (3.0.11-1ubuntu13).
autoconf is already the newest version (2.71-3).
automake is already the newest version (1:1.16.5-1.3ubuntu1).
The following packages were automatically installed and are no longer required:
libdebuginfod-common libdebuginfod1t64 libfwupd2 libgusb2 libmspack0t64 libxmlsec1t64 libxmlsec1t64-openssl
libxslt1.1 zerofree
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Selecting previously unselected package metax-linux-dkms.
(Reading database ... 141807 files and directories currently installed.)
Preparing to unpack .../metax-linux-dkms_3.9.10-1_amd64.deb ...
Unpacking metax-linux-dkms (3.9.10) ...
Setting up metax-linux-dkms (3.9.10) ...
Loading new metax-linux-3.9.10 DKMS files...
Building for 6.8.0-124-generic
Building for architecture x86_64
Building initial module for 6.8.0-124-generic
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: /usr/bin/autoconf --force
configure.ac:23: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:23: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from...
m4/config.m4:14: AC_METAX_CONFIG is expanded from...
configure.ac:23: the top level
autoreconf: running: /usr/bin/autoheader --force
autoreconf: configure.ac: not using Automake
autoreconf: 'config/install-sh' is updated
autoreconf: Leaving directory '.'
ERROR (dkms apport): unable to determine source package for metax-linux-dkms
Error! Bad return status for module build on kernel: 6.8.0-124-generic (x86_64)
Consult /var/lib/dkms/metax-linux/3.9.10/build/make.log for more information.
dpkg: error processing package metax-linux-dkms (--install):
installed metax-linux-dkms package post-installation script subprocess returned error exit status 10
Errors were encountered while processing:
metax-linux-dkms
ERROR: failed to install deb/metax-linux_3.9.10-1_amd64.deb
错误原因：metax-linux-3.9.10/common/mx_devinfo_c500.h 中代码有问题：
#define MX_DEV_PCI_C500_LIST \
MX_DEV_PCI_C500(0x9999, 0x4001, 0x4019, c500, MXC500, mx_devinfo_c500) \
MX_DEV_PCI_C500(0x9999, 0x4000, 0x4018, c550, MXC550, mx_devinfo_c550) \
MX_DEV_PCI_C500(0x9999, 0x4083, 0x409b, n260, MXN260, mx_devinfo_n260) \
MX_DEV_PCI_C500(0x9999, 0x4040, 0x4058, c500x, MXC500X, mx_devinfo_c500x) \
MX_DEV_PCI_C500(0x9999, 0x4020, 0x4038, c588, MXC588, mx_devinfo_c588)
正确的代码应该是：
#define MX_DEV_PCI_C500_LIST \
MX_DEV_PCI_C500(0x9999, 0x4001, 0x4019, c500, "MXC500", mx_devinfo_c500) \
MX_DEV_PCI_C500(0x9999, 0x4000, 0x4018, c550, "MXC550", mx_devinfo_c550) \
MX_DEV_PCI_C500(0x9999, 0x4083, 0x409b, n260, "MXN260", mx_devinfo_n260) \
MX_DEV_PCI_C500(0x9999, 0x4040, 0x4058, c500x, "MXC500X", mx_devinfo_c500x) \
MX_DEV_PCI_C500(0x9999, 0x4020, 0x4038, c588, "MXC588", mx_devinfo_c588)
也就是说倒数第二个参数本应是字符串，双引号都丢失了
